Features: -Adjust water temperature for sensor faucet.-0.5" FIP/IPS thread fittings.-Solid-brass construction.-Micro adjustment knob.-Application: Bathroom faucet.-Compatible Sink Part Number: .-Product Type: Connector.-Finish: Chrome.-Gloss Finish: N...
Morningstar's Remote Temperature Sensor (RTS) provides improved battery charging in solar systems that experience temperature variations during the year. The RTS measures temperature at the battery and the controller uses this data for very accurate temperature compensation. Use of the RTS is recommended whenever the temperature at the battery will be more than 5°C (9°F) different than the temperature at the controller. The TriStar has no on-board temperature compensation; therefore the use of the RTS is required for temperature compensated charging. Other Morningstar controllers will default to an on-board temperature sensor if a RTS is not connected. The RTS is compatible with the following Morningstar controllers: ProStar (soldering required) TriStar SunKeeper SunSaver Duo SunSaver MPPT For maximum protection from harsh environments, the sensor is encapsulated in epoxy inside a power lug housing. The RTS is also protected from lightning surges and short circuits. Standard Features: Highly accurate: +/- 1.5°C (2.7°F) Cable length: 10 meters (33 feet) User may easily extend cable length up to 30 meters (100 feet) using standard cable Corrects for temperatures from -30°C (-22°F) to +80°C (+176°F) Wires are non-polarized Specifications: Power lug housing: 9.5 mm (3/8") screw hole 2-conductor copper cable with PVC jacket, 0.34mm² (#22 AWG) Cable rated UL CMR UL recognized component when used with TriStar CE certified for use with all compatible Morningstar controllers Sensor noise is filtered
Keep that refrigerator cool. This temperature sensor from Exact Replacement Parts is OEM equivalent. Exact Replacement Parts, Inc. has been offering the value of choice since 2003 with over 2,000 plus appliance parts. Features: -Oem-equivalent replace...
Adjust water temperature for sensor faucet//0.5" FIP IPS thread fittings//Solid brass construction//Micro adjustment knob//Very easy to assemble//Bathroom faucet//Connector//Chrome//Brass//Solid brass //Scratch Resistant//Rust Resistant//Heat Resistant...
Xantrex' Battery Temperature Sensor is designed for use with Xantrex LinkPro Battery Monitors. The BTS mounts on a terminal post of a battery in a bank or on the side of a battery and measures its temperature. It sends precise information to the LinkPro Battery Monitor. 32 Feet in Length
Control with your smartphone, compatible hub required//Product features a detection area of 15 feet and detection angle of 100°//Pair a smart light to a motion sensor for hands free control//Create automation to turn your lights on and off when motion ...
A compatible hub is required to control this sensor//Set notifications to remind you when windows and doors are left open or turn your lights on and off as doors or opened and closed//Use the integrated temperature sensor to monitor the temperature in ...
This sensor measures the surface temperature of the PV modules. By affixing the sensor to the backside of the PV module, the module temperature can be measured. Module temperature can affect power output. By measuring module temperature one can monitor the effects on the solar system's performance. Mounting tip: It is recommended to fix the sensor and the cable with an additional adhesive tape. Specifications
Hardsided//Sensor//Solid Color//White//Non Toxic//China//Picnic;Pool;Marine Fishing;Camping Hiking;Patio//No Distressing//No Natural Variation//Commercial OR Residential Certifications//
Wind & Weather
Indoor outdoor clock//Large, easy to read numerals//Backlight automatically illuminates after dark//Analogue//Black White//Round//Metal//Modern & Contemporary//Batteries Required//D;AA//Glass Face//Quartz movement Crystal//China//Adult//Indoor Outdoo...
The module temperature sensor is used by professional PV plant operators to know the temperature of the modules installed in the array. The module temperature sensor converts this reading into a voltage signal. This signal is sent back to the monitoring device. This information is then displayed via the proLOG or the blueplanet professional web portal. As the system operator it's important to know the systems' performance. The module temperature sensor will help to enhance kWh performance by ensuring reliable access to the all necessary data.