blogger Solar Mounting Solar Mounting youtube pinterest pinterest pinterest


Solar Mounting

 

Instapark® ZJ-02 Solar Panel Mounting Hardware Kit

Other Instapark Products
How To Videos for Instapark® ZJ-02 Solar Panel Mounting Hardware Kit

Made of rust-free anodized aluminum alloy, the instapark ZJ-02 comes with four brackets for mounting the solar module flat to RV, marine or cabins roof top. What's in the box: Bracket: 4 Nuts & Bolts: 4 of each Washer: 4 Split washer: 4

 

IronRidge Tilt Leg Kit, Qty. 1

IronRidge Tilt Leg Kit, Qty. 1
Special Price
$33.09

Model and Size: IronRidge, Tilt Leg Kit, 0-40 deg tilt, including brackets, 6 inch & 10 inch legs, Aluminum Mill Finish, Qty 1, 51-7210-010 IronRidge, Tilt Leg Kit, 0-40 deg tilt, including brackets, 6 inch & 15 inch legs, Aluminum Mill Finish, Qty 1, 51-7215-015 IronRidge, Tilt Leg Kit, 0-40 deg tilt, including brackets, 6 inch & 20 inch legs, Aluminum Mill Finish, Qty 1, 51-7220-020 IronRidge, Tilt Leg Kit, 0-40 deg tilt, including brackets, 6 inch & 25 inch legs, Aluminum Mill Finish, Qty 1, 51-7225-025 IronRidge, Tilt Leg Kit, 0-40 deg tilt, including brackets, 6 inch & 30 inch legs, Aluminum Mill Finish, Qty 1, 51-7230-030 IronRidge, Tilt Leg Kit, 0-40 deg tilt, including brackets, 6 inch & 40 inch legs, Aluminum Mill Finish, Qty 1, 51-7240-040 IronRidge provides a number of attachment options for solar PV modules and solar mounting solutions. The first is an adjustable L-foot component. Made of extruded aluminum, these L-feet are strong enough for both residential and commercial solar PV module installations. The vertical slots make it easy to level the PV array when there are irregularities in the roof. When increased airflow or roof flashing is required, IronRidge offers two different types of standoffs. Lightweight aluminum standoffs are available for flush mount solar PV module applications, Heavy-duty, welded steel standoffs are available for tilt mount solar mounting applications. These standoffs support common flashing products such as those from Oatey. In addition, the IronRidge standoffs are available in multiple heights. Tilt leg attachments are available for solar PV projects where installers wish to optimize power by tilting solar PV modules more directly at the sun. These extruded aluminum legs attach quickly and directly to either the XRS or XRL solar PV rails. The well thought-out and simple design enables adjustability in all three dimensions. The IronRidge tilt legs come in a variety of lengths to cover a wide range of desired tilt angles.

Direct Mount Racking System for 1060 Solar Generator Kit Solar Panels for Asphalt Shingle Roofs

Direct Mount Racking System for 1060 Solar Generator Kit Solar Panels for Asphalt Shingle Roofs
Special Price
$458.89
Grape Solar

The Grape Solar Racking System is ideal for installing four 60 cell PV solar panels on an asphalt shingle sloped roofs. This low profile racking system is built from aluminum and stainless steel for years of all-weather service. The finished array stands just high enough above the roof to allow air flow below the panels. The included hardware allows for easy installation on Asphalt Shingle roofs.

Swiftly Done Bright Solar Power Outdoor LED Light No Tools Required Peel and Stick Motion Activated

Swiftly Done Bright Solar Power Outdoor LED Light No Tools Required Peel and Stick Motion Activated
Special Price
$8.67
SwiftlyDone

The RJ Technologies Outdoor Security Solar Powered LED motion light requires NO wiring and NO tools! Just peel off the plastic and stick to any surface! (Sticks on bricks, stucco, wood, metal, glass, etc.). Mounts in seconds! Perfect for patios, decks, pathways, stairways, driveways, garden, etc. The light will turn on at night, and automatically off in the morning. It will be in dim light mode until it senses motion; when sensing motion it will activate the bright light. Bright light turns off 10 seconds after motion stops. Detects motion within 10 feet - 120 degree angle. The RJ Technologies solar light uses a powerful 0.44W solar panel to charge the light during the day. Solar panel life span: 5 years - LED Life Span: 50,000 hours Package includes one solar light, activation key and two screws (Screws are unnecessary, just peel off and mount.)

Gable Mounted Solar Attic Fan - 30 Watts - 2500 sq ft

Gable Mounted Solar Attic Fan - 30 Watts - 2500 sq ft
Special Price
$568.99
Natural Light

The Solar Attic Fan is a simple and environmentally sensible solution that can save you money. Powered completely by free solar energy, this sleek and efficient vent is both compact and quiet.

Flora Solar Lamp Post - Wall Mount

Flora Solar Lamp Post - Wall Mount
Special Price
$99.50
Gama Sonic

Combining classical design with modern lighting technology, the Flora Solar Lamp Post is a stunning outdoor lighting solution for showcasing your garden or yard.

Dual Mount Solar Powered Metal Owl Accent Light Statue

Dual Mount Solar Powered Metal Owl Accent Light Statue
Special Price
$77.99
PineTopSales

Perched on your fence or sitting in your garden the wise owl watches over your flowers and plants//Colourful glass chest lights up and creates a subtle light display in your garden//Sturdy metal construction to withstand elements and not so gentle hand...

IronRidge Tilt Leg Kit, Qty. 1

IronRidge Tilt Leg Kit, Qty. 1
Special Price
$28.40

Model and Size: IronRidge, Tilt Leg Kit, 0-40 deg tilt, including brackets, 6 inch & 10 inch legs, Aluminum Mill Finish, Qty 1, 51-7210-010 IronRidge, Tilt Leg Kit, 0-40 deg tilt, including brackets, 6 inch & 15 inch legs, Aluminum Mill Finish, Qty 1, 51-7215-015 IronRidge, Tilt Leg Kit, 0-40 deg tilt, including brackets, 6 inch & 20 inch legs, Aluminum Mill Finish, Qty 1, 51-7220-020 IronRidge, Tilt Leg Kit, 0-40 deg tilt, including brackets, 6 inch & 25 inch legs, Aluminum Mill Finish, Qty 1, 51-7225-025 IronRidge, Tilt Leg Kit, 0-40 deg tilt, including brackets, 6 inch & 30 inch legs, Aluminum Mill Finish, Qty 1, 51-7230-030 IronRidge, Tilt Leg Kit, 0-40 deg tilt, including brackets, 6 inch & 40 inch legs, Aluminum Mill Finish, Qty 1, 51-7240-040 IronRidge provides a number of attachment options for solar PV modules and solar mounting solutions. The first is an adjustable L-foot component. Made of extruded aluminum, these L-feet are strong enough for both residential and commercial solar PV module installations. The vertical slots make it easy to level the PV array when there are irregularities in the roof. When increased airflow or roof flashing is required, IronRidge offers two different types of standoffs. Lightweight aluminum standoffs are available for flush mount solar PV module applications, Heavy-duty, welded steel standoffs are available for tilt mount solar mounting applications. These standoffs support common flashing products such as those from Oatey. In addition, the IronRidge standoffs are available in multiple heights. Tilt leg attachments are available for solar PV projects where installers wish to optimize power by tilting solar PV modules more directly at the sun. These extruded aluminum legs attach quickly and directly to either the XRS or XRL solar PV rails. The well thought-out and simple design enables adjustability in all three dimensions. The IronRidge tilt legs come in a variety of lengths to cover a wide range of desired tilt angles.

Go Power! ARM-UNI Tilt Mount Kit

Go Power! ARM-UNI Tilt Mount Kit
Special Price
$79.99
Go Power!

Go Power! Tilt Mount Kit used to tilt the panels towards the sun. This works very well for increasing the amount of power it can capture, espescially in the winter months when the sun is low on the horizon. Using the tilt kit in the winter months can produce up to 40 percent more power. Summertime campers will see 4 percent increase in power as well as includes all instructions.

6000 Watt (6kW) Solar Ground Mount Kit w/Microinverters

6000 Watt (6kW) Solar Ground Mount Kit w/Microinverters
Special Price
$12,179.00
GigaWatt

Is this solar panel kit right for me? For half the homes in the United States this 6000 Watt microinverter based kit is more than enough to completely eliminate their bill. You'll need the roof space though. The modules will occupy about 460ft2 of roof space. Luckily with microinverters the modules can be placed anywhere, they don't have to be grouped all together. The average American uses 920kWh per month. Based on that average this system could provide 49-99% of your usage and reduce your bill to almost ZERO. If you're an average consumer of electricity (920kWh/month), a 6000W system could probably give you the ticket to electric bill freedom. A 6kW Solar Kit requires up to 450 square feet of space. 6kW or 6 kilowatts is 6,000 watts of DC direct current power. This could produce an estimated 400 to 1,000 kilowatt hours (kWh) of alternating current (AC) power per month, assuming at least 5 sun hours per day with the solar array facing South. The highest output will be achieved with an unobstructed south-facing view of the sun for maximum solar power. The actual power generated will vary based on location, equipment and installation factors. Refer to your electric utility bill to find the actual kWh used per month and compare it to how much power these low cost 6kW PV systems can generate. What is included in my 6kW solar installation kit? Our kits provide all the solar components you need from start to finish. GigaWatt 255 Watt Solar Panels APS YC500A Grid-Tie Microinverters Ironridge Racking and Mounting Solar Panels - 16 x 255W high performance 60-cell polycrystalline PV modules with 25 year warranties. Micro Inverters - 8 x efficient APS micro-inverters that connect two PV modules per inverter. Racking and Attachments - Industry leading IronRidge ground racking mounts the solar panels on the ground. System Monitoring - Free with every kit purchase! View and analyze your solar energy production in real-time. System Design and Financial Analysis - We'll custom engineer this system for your home and calculate the payback on your solar investment. Not Included - Wire, conduit, fittings, breakers, AC/DC Disconnects (if required), junction boxes and a sub panel (if required). All these items can be purchased at any electrical supply shop, Home Depot or Lowes, and will typically cost $300 to $500. Our technical support representative will provide a shopping list once your plans are complete. How easy is it to install? You can install a 4kW ground-mounted solar system in one or two weekends. Our kits use industry leading solar panels, inverters, and racking systems specifically selected and combined to make do-it-yourself installation possible. A homeowner who has wired an AC outlet and is comfortable working with electricity can install our Solar kit. The micro-inverters in our kits have significantly improved the safety of installing a solar panel system by generating standard AC power instead of dangerous DC power. Micro-inverters allow you to have as few or as many panels as you like and to easily expand your system later. They simplify installation as well as allowing monitoring of each module independently. Since each panel is an individual system they maximize the power output from each panel resulting in an average 15% increase in power generation per panel. If self-installation is not for you, we can help you find a local solar contractor to help you with the process. What is the installation process? A typical solar ground-mounted system for a home can be installed within one or two weekends once a permit is obtained from your city or county. After that, it's just 5 easy steps until you're producing power from the sun. Take your plan set to your city or county and apply for a permit to install. The plan review process can take up to 10 days. Once the city or county approves your plans and issues your permit you may begin installing your solar system. First, the racking and mounting system must be installed. This is the most laborious process of the solar installation process. You have to dig deep holes and pour concrete. Once the racking and mounting system is secured in the ground, the solar panels and inverters can be quickly installed. The inverter(s) are then tied into the grid through a dedicated breaker in your main service panel. When the installation is complete, your city or county inspector must sign off on it. You can accomplish this by scheduling an inspection meeting with them. Lastly, you must send the final job card, interconnection paperwork, and your net metering agreement to your utility. They will then grant you Permission to Operate. It can take up to 4 weeks after passing inspection for your utility to provide you Permission to Operate. With our interconnection service we will process all the paperwork for you. Our job is not over until your system is producing clean energy from the sun! We offer you support throughout the installation process with manuals, videos, and technical support. How much should I pay a contractor to install the solar kit? Any licensed general, electrical or solar contractor can install our solar kits. If you select to hire a contractor to install your solar kit, you should expect to pay approximately $1.00 per watt for labor, wire, conduit, fittings, breakers and other miscellaneous electrical components to complete the solar system installation. For a 4 kW (kilowatt) system, which is 4,000 watts, you can expect to pay $4,000 for installation. Why Choose Grid-Tie Microinverters? Safer: The system does not employ dangerous, unprotected high DC voltages, eliminating the risk of potential fires as outlined above. The system's cabling from your solar system to your switchboard is regular 240V AC, the same as all other household cabling, and is circuit protected via a circuit breaker in your switchboard. Shade tolerant and fault redundancy: Each solar panel operates independently, as it has its own dedicated micro inverter. The result is that the system does not suffer from the 'Christmas light effect' explained above; one shaded or soiled panel will result in a loss of power from that panel only, and will not drag down the performance of the others. The same goes for any fault; in a conventional DC solar system, a complete failure of a solar panel or central string inverter will usually result in an entire system failure. Easily expandable: The system size is not ultimately dictated by the capacity of a wall mounted string inverter, allowing for additional panels to be added at any time and only limited by your space and budget. Your Complete Solar Kit is based on the best micro-inverters in the business. These inverters are backed by world class technical & customer support. They come with an unparalleled 25 year warranty that matches the 25 year performance module warranty. One of the best features of the micro inverter is the ability to size your system in 2 module increments. Call 866-798-4435 to give us details about your house and we can quickly provide a good estimate of how much the kit would produce if installed at the proposed location under proposed tilt and azimuth. You'll need to provide your zip code, your solar panel tilt and compass heading of the solar panel pitch. Free System Monitoring The APS microinverter solution offers intelligent monitoring through the integrated APS Communicator, our state-of-the-art Energy Communication Unit, and the APS Monitor, our full-featured Energy Monitoring & Analysis software. The APS Communicator (ECU) The APS Communicator, our state-of-the-art Energy Communication Unit (ECU), is the information gateway for our microinverters. The unit collects module performance data from each individual microinverter and transfers this information to an internet database in real time, requiring only a single data and power cable. Through the APS Monitor software, the APS Communicator gives you precise analysis of each microinverter and module in your solar installation from any web-connected device. The APS Communicator's integrated http webserver offers the simplest and most flexible network integration of any data logger on the market. The user-friendly browser-based interface lets you access your solar array in seconds. Features Collects individual module and microinverter statistics Communicates in real time Requires no additional wiring The APS Monitor (EMA) The APS Monitor, our robust wireless Energy Monitoring and Analysis (EMA) software, enables comprehensive, web-based monitoring that analyzes and reports the performance of each module in your solar array. This real-time data can be accessed from any web-connected device, anywhere, anytime. Unlike conventional "string" inverter systems, the APS Monitor gives you control over each individual module and microinverter in your solar array, optimizing performance over the system's lifetime. Networked with the advanced APS Communicator (ECU), the APS Monitor (EMA) promptly detects any performance issues in your solar array, pinpointing the location and nature of the problem and providing precise guidance for necessary maintenance, all within our user-friendly graphic interface. Features Monitors and allows analysis of each solar module and microinverter Allows remote access to the solar array Shows performance issues and alerts the user to inverter events Communicates in real time Graphs system solar output over time to boost troubleshooting

IronRidge Standoff, Qty. 1

IronRidge Standoff, Qty. 1
Special Price
$10.29

Model and Size: IronRidge, Standoff, Flush Mount,3 inches, 1.5 inch diameter, Aluminum Mill Finish, Qty. 1, 51-6003-500L IronRidge, Standoff, Flush Mount, 4 inches, 1.5 inch diameter, Aluminum Mill Finish, Qty. 1, 51-6004-500L IronRidge, Standoff, Flush Mount, 6 inches, 1.5 inch diameter, Aluminum Mill Finish, Qty. 1, 51-6006-500L IronRidge, Standoff, Flush Mount, 7 inches, 1.5 inch diameter, Aluminum Mill Finish, Qty. 1, 51-6007-500L IronRidge provides a number of attachment options for solar PV modules and solar mounting solutions. The first is an adjustable L-foot component. Made of extruded aluminum, these L-feet are strong enough for both residential and commercial solar PV module installations. The vertical slots make it easy to level the PV array when there are irregularities in the roof. When increased airflow or roof flashing is required, IronRidge offers two different types of standoffs. Lightweight aluminum standoffs are available for flush mount solar PV module applications, Heavy-duty, welded steel standoffs are available for tilt mount solar mounting applications. These standoffs support common flashing products such as those from Oatey. In addition, the IronRidge standoffs are available in multiple heights. Tilt leg attachments are available for solar PV projects where installers wish to optimize power by tilting solar PV modules more directly at the sun. These extruded aluminum legs attach quickly and directly to either the XRS or XRL solar PV rails. The well thought-out and simple design enables adjustability in all three dimensions. The IronRidge tilt legs come in a variety of lengths to cover a wide range of desired tilt angles.

Pagoda Post Mount Solar Lamp

Pagoda Post Mount Solar Lamp
Special Price
$179.00
Gama Sonic

Includes new efficient Li-Ion rechargeable batteries. Long lasting light. Energy efficient. Batteries with 3.2V voltage and 3000Ma charging capacity. Automatically turns on at dusk and off dawn. Manual Hi/Lo light brightness switch. Eight pieces super bright 10 mm leds with patented prism. Patented cone reflector creates a brighter light. Solar lamp posts with durable, rust resistant cast aluminum frame. Light duration from 8 to 10 hrs.. No wiring needed. Weather requiring no maintenance. Made from powder coated cast aluminum. Black finish. 11 in. L x 6.5 in. W x 23 in. H. Owner Manual . Capture the energy of the sun with the beautiful Pagoda Solar Lamp with post mount. Install new or replace your outdated and energy-guzzling gas lamps or low voltage lighting with this energy-efficient solar powered lamp. Our patented cone reflector technology, in combination with super bright LED's, helps make the Pagoda Solar Lamp one of the world's brightest solar lamps available. Enhance your outdoor lighting experience by installing this unit on a deck or any column. With a convenient high/low brightness switch, you can choose between a brighter light or longer lasting light. The Post Mount Solar Lamp will shine for up to 15 hours on the low setting and up to 12 hours on the high setting with a single day's solar charge.

Solartech Power Side-of-pole Solar Panel Mounting System, RAC-M-60

Solartech Power Side-of-pole Solar Panel Mounting System, RAC-M-60
Special Price
$75.00

These universal side-of-pole mounts from Solartechpower, Inc are designed to hold a single module 26.2" to 59.5" in width. Constructed from galvanized steel, your modules are protected from damage in virtually all weather conditions, including extremes of wind, rain, ice, and snow. The structures will last the life of the PV modules they support, and beyond. Easily Assembled. Conveniently packaged and labeled sub-assemblies, along with well-illustrated instructions make assembly rapid and straightforward. You have picked out your solar panels for your home, business, RV or boat, and now it's time to consider how you will display these valuable solar modules. Mounting solar panels correctly is part of maximizing production, and it is also an import way to protect your investment from the force of wind. The proper solar panel mounting provides stability and the proper directional and latitudinal orientation for the solar array. * Will fit 4" and 6" poles * Designed to hold a single module 26.2" to 59.5" in width * Will Support Solartech Power 60W / 65W Solar Panels Material Steel: Q235 / A306GRB Tensile Strength: (qb/MPa) : 375-500 Yeld Strength: 235MPa Elongation: (b5/%) >25

 
 
 
 
 
/* ]]> */