Fronius IG Plus A 7.5 UNI 7,500 watt inverter

7,500 watt solar inverter Fronius IG Plus Advanced 7.5-1 UNI. PV inverter model # 4,210,125,800. The latest inverter technology from Fronius with 96% efficiency and internal DC disconnect safety switch. Fronius IG Plus Advanced inverters include Arc Fault Protection, Smart Grid integration, built in data communications, and six circuit string combiner, integrated lockable DC Disconnect. The lightest and best looking inverter with satin finished aluminum NEMA 3R housing with Power Plug system for easy installation.

$2,850.00
Buy
 

Related Products

Pages: Fronius Solar InvertersFronius Solar Inverters1 | 2 | 3 | 4 | 5 | 6Fronius Solar InvertersFronius Solar Inverters

Fronius COM Card Retrofit

Fronius COM Card Retrofit
Black Friday/ Cyber Monday Price
$112.00

Fronius
The Heart of the Fronius DATCOM System. The COM Card is communications hardware that is installed directly into your FRONIUS inverter in the same way a Plug-n-Play card is installed in your PC. Every inverter needs a COM Card in order to communicate to the Datalogger to allow you to receive your data. Fronius IG Solar Inverter Interface and power supply option card for aftermarket installation of the DatCom data communication system;DatCom System requires one COM Card per Fronius IG inverter and one Datalogger Box per DatCom System. Features an internal plug-in card for data communications.

Fronius Interface Card

Fronius Interface Card
Black Friday/ Cyber Monday Price
$178.00

Fronius
The Interface Card enables a user to output data into an open protocol for a system of anywhere between one and 100 Fronius IG Inverters. This data could then be used by third-party sources for different monitoring options (e.g. Fat Spaniel). This card does not replace the need for a Datalogger Box or Card. This interface offers real time open protocol data without data storage for up to 100 inverters and 10 sensor boxes. Specifications:

Fronius Irradiance Sensor

Fronius Irradiance Sensor
Black Friday/ Cyber Monday Price
$190.00

Fronius
This sensor is designed for measuring solar irradiated energy. In most cases the sensor is mounted on the frame of the solar module. Comparing the amount of irradiated power with the power produced by the inverter provides a detailed analysis on the performance of the PV system. Mounting tip: The sensor comes fixed onto an aluminium profile withan 8 mm hole. Thus screwing onto the module frame is very easy.Please mind, that the sensor does not cast any shadow on the module. Specifications

Fronius 570-1035 Modbus Card for SunSpec RS485 Protocol

Fronius 570-1035 Modbus Card for SunSpec RS485 Protocol
Black Friday/ Cyber Monday Price
$250.90

Fronius
Fronius 570-1035 Modbus Card for SunSpec RS485 Protocol Third-party components can be integrated easily using the Modbus RTU - SunSpec interface. The Fronius Modbus Card allows Fronius inverters to be integrated very easily into thirdparty systems. All PV system data is output via a standardised Modbus RTU - SunSpec protocol for processing in the next stage of the process. Installation is straightforward, so the Fronius Modbus Card can be used in both new and existing systems. TECHNICAL DATA: Supply voltage (Power supply via AC from the Fronius inverter): 208 V / 240 V / 277 V (+10% / -15%) Power consumption: 1.6 W Interfaces Port: Description: - Fronius Solar Net RJ45 "IN" - Fronius Solar Net RJ45 "OUT" - Modbus RTU 6-pin terminal "C, TXD0, TXD1, RXD1, RXD0, V" Connection options: Modbus RTU 2 or 4 wire LED Indicators - Power LED: Green - State LED: Red - Com LED: Yellow 208/240/277 VAC No Datalogger or COM Card Required 570-1035, 4,240,013,Z

Fronius Interface Box

Fronius Interface Box
Black Friday/ Cyber Monday Price
$285.00

Fronius
The Interface Box enables a user to output data into an open protocol for a system of anywhere between one and 100 Fronius IG Inverters. This data could then be used by third-party sources for different monitoring options (e.g. Fat Spaniel). This box does not replace the need for a Datalogger Box or Card. This interface offers real time open protocol data without data storage for up to 100 inverters and 10 sensor boxes. Specifications:

Fronius Datalogger easy Card

Fronius Datalogger easy Card
Black Friday/ Cyber Monday Price
$347.00

Fronius
The Fronius Interface Card easy has a serial interface with an open data protocol, that enables following data from one Fronius inverter to be downloaded and processed: current data daily information total data year information (only in combination with a data logger) The Interface Card easy is not a LocalNet-component, therefore it does not require a Com Card and Datalogger. Advantages Integration of system data in other IT systems (building control, alarm systems, etc.) Data transfer to PC for other visualization purposes (e.g. to include PV data on a homepage) Interface to other data logging systems Power is supplied to the Interface Card easy via the AC side of the inverter. This ensures that power is supplied to this component 24 hours a day. The Datalogger easy was created for small systems with only one Fronius IG. It has the same functions as its big brother - Datalogger pro - but is restricted to one inverter. Low-cost and high-power. *The Interface Card easy can be used for Fronius inverters with serial numbers 14330071 and higher following a software update, (excluding 277 volt applications on IG Plus). The software update is not required for serial number 1715xxxx and higher.In the case of an older Fronius IG, a hardware update is required in addition to the software update.

Fronius Datalogger easy Box

Fronius Datalogger easy Box
Black Friday/ Cyber Monday Price
$365.00

Fronius
Works in tandem with COM Cards within DatCom System to provide real-time and archived data and enable use of PC based monitoring and free web-hosted data access. Supports 1 Fronius IG Solar Inverter. The Datalogger easy was created for small systems with only one Fronius IG. It has the same functions as its big brother - Datalogger pro - but is restricted to one inverter. Low-cost and high-power. External device for collecting and archiving data.

Fronius Sensor Card

Fronius Sensor Card
Black Friday/ Cyber Monday Price
$535.00

Fronius
A Sensor Card is required for use with environmental or other sensors used in your data acquisition. It is possible to install various sensors into the Fronius DATCOM system. These permit an in-depth look into the way the PV system works and makes it possible to draw informed conclusions about the overall performance. The following sensors can be connected to the Sensor Card: irradiance ambient temperature module temperature energy counter wind speed Each Sensor Card allows connection of up to six sensors: 2 temperature channels (PT 1000), 1 irradiance channel (Voltage input 0-1V), 2 digital inputs, 1 standard 20mA current interface. *This product is available either as a plug-in card or as a box. Plug-in cards are recommended for a maximum distance of 20 - 30 m between the inverter and sensor(s). Larger distances can be bridged using the box.

Fronius Datalogger pro Card

Fronius Datalogger pro Card
Black Friday/ Cyber Monday Price
$535.00

Fronius
The Datalogger is the system's information collector. It is the interface between inverter (via Com Card) and PC. Here the data is bundled and pre-processed for the Fronius IG access software. The brain of the operation. The Datalogger pro Card stores data from up to 100 inverters and 10 Sensor Cards / Boxes, along with your programmed sensor constants and other information. Works in tandem with COM Cards within DataCom System to provide real-time and archived data and enable use of PC based monitoring and free web-hosted data access. Supports up to 100 Fronius IG Solar Inverters per Datalogger Card. *The Datalogger is available either as a plug-in card or box. Both are simply plugged into the inverter using the plug & play principle. The card is recommended for distances of up to 20 m between the inverter and PC; the box can bridge a distance of up to 1 km. The Datalogger stores every detail of the PV system for a period of up to 3 years. Specifications:

Fronius Datalogger pro Box

Fronius Datalogger pro Box
Black Friday/ Cyber Monday Price
$575.00


The Datalogger is the system's information collector. It is the interface between inverter (via Com Card) and PC. Here the data is bundled and pre-processed for the Fronius IG access software. The brain of the operation. The Datalogger pro Box stores data from up to 100 inverters and 10 Sensor Cards / Boxes, along with your programmed sensor constants and other information. Works in tandem with COM Cards within DataCom System to provide real-time and archived data and enable use of PC based monitoring and free web-hosted data access. Supports up to 100 Fronius IG Solar Inverters per Datalogger Box. -The Datalogger is available either as a plug-in card or box. Both are simply plugged into the inverter using the plug & play principle. The card is recommended for distances of up to 20 m between the inverter and PC; the box can bridge a distance of up to 1 km. The Datalogger stores every detail of the PV system for a period of up to 3 years. Specifications 100 solar inverters from the Fronius IG or Fronius IG Plus series (several types may be combined, e.g. IG 15 and IG 60 with an internal and external housing) 10 sensor cards / boxes 10 public display cards / boxes 1 interface card / box 200 string controls

Fronius Sensor Box

Fronius Sensor Box
Black Friday/ Cyber Monday Price
$575.00

Fronius
A Sensor Box is required for use with environmental or other sensors used in your data acquisition. It is possible to install various sensors into the Fronius DATCOM system. These permit an in-depth look into the way the PV system works and makes it possible to draw informed conclusions about the overall performance. The following sensors can be connected to the Sensor Box (Card): irradiance ambient temperature module temperature energy counter wind speed Each Sensor Box allows connection of up to six sensors: 2 temperature channels (PT 1000), 1 irradiance channel (Voltage input 0-1V), 2 digital inputs, 1 standard 20mA current interface. *This product is available either as a plug-in card or as a box. Plug-in cards are recommended for a maximum distance of 20 - 30 m between the inverter and sensor(s). Larger distances can be bridged using the box.

FRONIUS GALVO 1.5-1 > 1500 VA GRID-TIE INVERTER

FRONIUS GALVO 1.5-1 > 1500 VA GRID-TIE INVERTER
Black Friday/ Cyber Monday Price
$1,385.00

Fronius
FRONIUS GALVO 1.5-1 > 1500 VA GRID-TIE INVERTER

Pages: Fronius Solar InvertersFronius Solar Inverters1 | 2 | 3 | 4 | 5 | 6Fronius Solar InvertersFronius Solar Inverters
 
 
 
 
/* ]]> */