Pure Sine Wave Inverter
Includes instructions. Innovative and compact design. Takes in 12 volt DC power and converts it to AC household power to run loads up to 150 watts of continuous AC power. Can connect to car utility adaptor or cigarette lighter adaptor for DC power. Great for laptops, cell phone chargers and camera battery chargers. Can surge to 260 watts. Warranty: Two years. 10.5 in. L x 7 in. W x 5 in. H (5.4 lbs.). Pure sine wave inverters are the ultimate choice for appliances and equipment that demand a clean, pure source of AC power. Line of pure sine wave inverters are guaranteed to run any load within their wattage range. As long as the load is not greater then 150 watts this inverter will run it.accessories , av , av & technology , batteries , chargers , computer , hardware , more , power , power accessories , technology
Includes detachable cable with 12V plug adaptor and cable with battery clamps. High efficiency. Converts 24 Volts DC to 300 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. Overload protection. Low battery alarm and shut down. Low idle power draw of less than 0.5 Amps. Safety certified to UL standards. 9.6 in. L x 5.7 in. W x 2.6 in. H (5 lbs.).
Magnum MS4448PAE, 4400, MS-PAE Series Pure Sine Wave Inverter/Charger The MS-PAE 120/240V Series Inverter/Charger from Magnum Energy is a pure sine wave inverter designed specifically for the most demanding renewable energy applications. The MS-PAE Series is powerful, easy-to-use, and best of all, cost effective. No series stacking required: The unique design of the MSPAE Series can provide 120 and 240 volts output in one unit, eliminating the need to stack two units together to get 240 volts. Parallel stacking: You can parallel up to four inverter/chargers for up to 17.6kw of power at 120/240V. The MP panels and router are required for parallel stacking the MS-PAE Series. Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger - using 25-30% less AC current than standard chargers. Features Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%. Choices: The MS-PAE Series comes in 24 and 48 volt configurations, allowing you to choose the model that is right for you. Versatile mounting: Mount the MS-PAE Series on a shelf or wall. Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance. Multiple ports: The MS-PAE Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port. Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be. Convenient switches: The MSPAE Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator. SunPlug Plug n' Play Solar Kit Advantages Peak Inverter Efficiency: 94% Maximum DC Input Voltage: 68V Maximum DC Input Current: 144A AC Nominal Voltage: 120 V 240 V AC Frequency: 60Hertz Continous AC Power Output: 4400Watts Nominal AC Voltage: 120Volts Mechanical Data Dimensions: 13.75 × 12.65 × 8 inches Weight: 55 pounds MS-PAE Data Sheet: //
Includes cables to connect to battery. Two GFCI outlets. Takes 24 volt DC battery power and converts it to an exact replica of AC household power. Warranty: Two years. 11.75 in. L x 8 in. W x 5 in. H (7.7 lbs.). The Go Power pure sine wave inverters are guaranteed to run any load within their wattage range. As long as the load is not greater then 300 watts this inverter will run it. The GP-SW300-24 can surge to 450 watts.
Includes 2000 watt pure sine wave inverter, DC installation kit, smart remote control, 12 V Remote switch, prewired 30 amp automatic transfer switch and 45 amp battery charger. 12 V DC battery power pure sine wave inverter. Innovative and compact design. Converts to an exact replica of AC household power. Two GFCI outlets and can use DC installation kit to connect to your batteries with ease. Ideal for kitchen appliances, consumer electronics, office and truck equipments. DC installation kit used to quickly and safely connect inverter to batteries. 10 ft. of 2/0 cable with 300 amp class T slow blow inverter fuse. Used on 12, 24 V inverters ranging from 2000 to 2800 watts and 3100 to 4000 watts. Remote control converts GPC chargers to four stage. Automatic transfer switch used to hardwire inverters into system. Allows one source of AC power to pass through to your loads. Prewired for a quick and easy installation to your existing system. 15 amp outlet on side that only powered by shore power or generator. Compact and lightweight battery chargers. Fast, accurate battery charging. Switchable output modes one for float charging and other for rapid charging. Warranty: Two years on inverter and remote switch. Pure sine wave inverter: 20 in. L x 10.75 in. W x 10.25 in. H (19 lbs.). DC installation kit: 12 in. L x 11 in. W x 3.25 in. H (11 lbs.). Smart remote control: 2.5 in. L x 1.5 in. W x 0.75 in. H. Remote switch: 5.1 in. L x 1.2 in. W x 4.7 in. H. Automatic transfer switch: 9 in. L x 4 in. W x 8 in. H (3.1 lbs.). Battery charger: 9.7 in. L x 6.7 in. W x 3.4 in. H (5 lbs.). Battery charger Owners Manual . DC Installation Kit Owners Manual . Automatic Transfer Switch Owners Manual . Pure sine wave inverters are guaranteed to run any load within their wattage range. When installing the fuse be sure to put it on the positive cable as close to the battery as possible.
PowerMax PMI-600PS (12V, 24V), Pure Sine Wave Inverter Anodized aluminum case provides durability & max heat dissipation ? Pure Sine Wave Power Inverter ? Built-in Cooling Fan ? Overload Indicator ? 2 AC Receptacles Continued Power: 650W Short Protect: Yes Continued Power (20 Min): 600W Overload Protect: Yes Peak Load Power Rate: < 1000W Dimension (LxWxH): 13.1 x 9.2 x 3.2 in No Load Current Draw Weight: 8 lbs Total Harmonic Distortion Efficiency Rating: 90% Input DC Voltage Range: 10-15V 20-30V Output Voltage Range: 115 +/- 3% 115 +/- 3% Output Frequency Range: 60 +/- 3Hz 60 +/- 3Hz Max Outer Temperature: < 65 C
Includes pure sine wave inverter, remote control, DC installation kit and prewired 30 amp automatic transfer switch. Pure sine wave inverter with 12 V DC battery power and two GFCI outlets. Converts to an exact replica of AC household power. Run any load within their wattage range. DC installation kit to connect to your batteries with ease. Can be surge to 2000 watt. On off remote is used with inverter and 24 V versions. DC installation kit with 10 ft. of #2 cable with 200 amp class T slow blow inverter fuse. Used on 12, 24 V inverters ranging from 1100 to 1800 watts and 2000 to 3000 watts. Automatic transfer switch used to hardwire inverters into system. Allows one source of AC power to pass through to your loads. Prewired for a quick and easy installation to your existing system. 15 amp outlet on side that only powered by shore power or generator. Warranty: Two years on inverter. Pure sine wave inverter: 18.75 in. L x 13.75 in. W x 7.25 in. H (17 lbs.). Remote: 8.25 in. L x 2 in. W x 4.5 in. H. DC installation kit: 12 in. L x 11 in. W x 3.25 in. H (6.6 lbs.). Automatic transfer switch: 9 in. L x 4 in. W x 8 in. H (3.1 lbs.). Remote Control Owners Manual . DC Installation Kit Owners Manual . Automatic Transfer Switch Owners Manual . Pure sine wave inverters are guaranteed to run any load within their wattage range. When installing the fuse be sure to put it on the positive cable as close to the battery as possible. There is an alternative source of AC already present, for example a generator or utility power. Power or generator, allowing you to hook up a battery charger without worrying about the inverter running the charger.
Charger input: 12V. DC output: 120V. 70 amp transfer relay. Two separate AC inputs. Each AC input is programmable for voltage and frequency. Generator start can be initiated by status relay contact. Can be programmed to activate when grid is lost. Integrates solar charging. Online mode can be used to prioritize batteries - inverter over the grid. Three or four stage charging with equalization. Adaptive algorithm is used during bulk to assess the condition of the battery. Set battery voltage thresholds to initiate charging. Zero transfer time when switching from Inverter to grid. 16ms transfer when going from grid to inverter. Transfer relay switches to inverter at the correct place in the wave form. 3X surge power. Large power overload allowances. Uses five temperature sensors placed throughout the unit to determine operation of two speed controlled cooling fans. Surge: 9000 watts. Outlets: Hard wired. Fuse: External. ETL safety listed to stringent UL standards. 12.79 in. L x 16.77 in. W x 8.15 in. H (59 lbs.). User manual . EVO will detect fault conditions and initiate a healthy shutdown before any product damage can be done.
Includes free remote. High performance and high surge power. Compact and lightweight. Soft start and low interference technology. Thermal, battery, overload, short circuit and earth fault universal circuit protection. Power identical to household electricity. Ideal for powering office equipment, television, DVD, video games, digital clocks and other sensitive loads from car, truck, boat, RV or solar system batteries. ETL listed. 12.2 in. L x 8.74 in. W x 3.46 in. H (8.4 lbs.). Owners Manual .
The MMS1012 from Magnum Energy is a pure sine wave inverter providing a cost-effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use and lightweight, the MMS1012 provides a reliable base for your energy system. The MMS Series inverter's improved design accommodates entertainment systems and small appliances in smaller RVs and boats. Based on the popular ME and MS Series inverters, the MMS1012 is smaller, lighter and less expensive while retaining all the built-in protection and reliability of ME and MS models. The MMS charger uses a PFC (power factor corrected) charger, which is 85% efficient and the same charger topology used in all Magnum models. The Magnum MMS1012 is ETL Listed to the stringent requirements of UL/cUL 458, CSA C22.2 #107.1-01 and meets the KKK-A-822E standard. Made in USA. Features: Versatile mounting: Mount the MMS Series on a shelf, bulkhead, or even upside down. Fan cooled: The MMS Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down. Current overload protection: The MMS Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage. Convenient switches: The MMS Series comes with an on/off front-mounted switch with an easy-to-read LED indicator. Circuit breaker protection: This model comes with built in input and output circuit breakers for ease of installation. Battery temp sensor: The standard battery temp sensor monitors temperatures from 0 - 50° C. Magnum Energy MMS1012 Specifications:
PR1000LCDRT2U Smart Application Pure Sine Wave 1000VA/700W AVR 8-Outlet 2U Rack/Tower USB/Serial UPS with LCD
The Smart App Sinewave LCD UPS Series provides an advanced level of power protection to support mission-critical servers telecom equipment VOIP and internetworking hardwareThe PR1000LCDRT2U has both a Pure Sinewave waveform and Full Automatic Voltage...
Two GFCI outlets and can use the GP-DC-KIT2 to connect to batteries. Takes 24 volt DC battery power and converts it to an exact replica of AC household power. Warranty: Two years. 18.75 in. L x 13.75 in. W x 7.25 in. H (17 lbs.). The Go Power pure sine wave inverters are guaranteed to run any load within their wattage range. As long as the load is not greater then 1500 watts this inverter will run it. The GP-SW1500-24 can surge to 2000 watts.