/>

blogger Ground Mount Ground Mount youtube pinterest pinterest pinterest


Ground Mount

 

24 Panel Heavy-Load Carport Solar Mounting Kit Schletter

Other Products
How To Videos for 24 Panel Heavy-Load Carport Solar Mounting Kit Schletter

The Schletter heavy-load residential carport kit is perfect for areas where solar and covered parking are desired. Ideal for electric vehicle EV owners, the kits fits most types of framed or frameless solar panels in a four vertical (portrait) by six across setup. measuring approximately 22ft X 20ft, with vertical posts spaced 18' O.C. to fit two vehicles side-by-side. Use it as a solar charging carport canopy for your Tesla, Nissan Leaf, Chevy Volt, BMW i3, Ford EV or other electric car. The carport mounting kit has all the necessary components including module clamps, rails, vertical posts and hardware. Does not include solar panels, inverters or cabling. Designed for high loads up to 140 mph wind and 35 psf snow at 5 degree tilt. 20 year limited warranty from Schletter. Materials produced in Germany and the USA. Engineer's PE stamped permit letter available for most states. Carport not sold separately; PV system order required.

frameless solar panels , Carport , Solar Mounting Kit , schletter , Pv system
 

DPW Top of Pole Mount for 4 Type H Modules

DPW Top of Pole Mount for 4 Type H Modules
Special Price
$850.00

DPW TPM, Top-of-Pole Mount for 4 Type-H Modules, 38-40 inch x 77-78 inch, 6 inchSCH40, 2hx2w-P, Specify Module # and Manufacturer in order note. DPW part # TPM4-H. The DPW Solar POWER-FAB TPM Top-of-Pole mount is designed to install quickly and provide a secure mounting structure for PV modules on a single pole. The module specific design reduces the number of com- ponents and provides for an easier assembly. The TPM utilizes high strength welded steel components and corrosion resistant hardware for long term reliability. Seasonal adjustability for maximizing production is provided by six different tilt-angle settings and is a single person operation.

DPW Top of Pole Mount for 14 Type G Modules

DPW Top of Pole Mount for 14 Type G Modules
Special Price
$3,475.00

DPW TPM, Top-of-Pole Mount for 14 Type-G Modules, 37-42 inch x 61-67 inch, 8 inchSCH80, 7hx2w-L, Specify Module # and Manufacturer in order note. DPW part # TPM14-G. The DPW Solar POWER-FAB TPM Top-of-Pole mount is designed to install quickly and provide a secure mounting structure for PV modules on a single pole. The module specific design reduces the number of components and provides for an easier assembly. The TPM utilizes high strength welded steel components and corrosion resistant hardware for long term reliability. Seasonal adjustability for maximizing production is provided by six different tilt-angle settings and is a single person operation.

DPW Top of Pole Mount for 10 Type G Modules

DPW Top of Pole Mount for 10 Type G Modules
Special Price
$2,421.00

DPW TPM, Top-of-Pole Mount for 10 Type-G Modules, 37-42 inch x 61-67 inch, 8 inchSCH40, 5hx2w-L, Specify Module # and Manufacturer in order note. DPW part # TPM10-G. The DPW Solar POWER-FAB TPM Top-of-Pole mount is designed to install quickly and provide a secure mounting structure for PV modules on a single pole. The module specific design reduces the number of components and provides for an easier assembly. The TPM utilizes high strength welded steel components and corrosion resistant hardware for long term reliability. Seasonal adjustability for maximizing production is provided by six different tilt-angle settings and is a single person operation.

DPW Top of Pole Mount for 15 Type G Modules

DPW Top of Pole Mount for 15 Type G Modules
Special Price
$3,783.00

DPW TPM, Top-of-Pole Mount for 15 Type-G Modules, 37-42 inch x 61-67 inch, 8 inchSCH80, 5hx3w-L, Specify Module # and Manufacturer in order note. DPW part # TPM15-G. The DPW Solar POWER-FAB TPM Top-of-Pole mount is designed to install quickly and provide a secure mounting structure for PV modules on a single pole. The module specific design reduces the number of components and provides for an easier assembly. The TPM utilizes high strength welded steel components and corrosion resistant hardware for long term reliability. Seasonal adjustability for maximizing production is provided by six different tilt-angle settings and is a single person operation.

DPW Top of Pole Mount for 6 Type H Modules

DPW Top of Pole Mount for 6 Type H Modules
Special Price
$1,458.00

DPW TPM, Top-of-Pole Mount for 6 Type-H Modules, 38-40 inch x 77-78 inch, 6 inchSCH40, 3hx2w-L, Specify Module # and Manufacturer in order note. DPW part # TPM6-H. The DPW Solar POWER-FAB TPM Top-of-Pole mount is designed to install quickly and provide a secure mounting structure for PV modules on a single pole. The module specific design reduces the number of com- ponents and provides for an easier assembly. The TPM utilizes high strength welded steel components and corrosion resistant hardware for long term reliability. Seasonal adjustability for maximizing production is provided by six different tilt-angle settings and is a single person operation.

12 Panel Type F Single Pole Mount DPW

12 Panel Type F Single Pole Mount DPW
Special Price
$2,550.00

DPW TPM, Top-of-Pole Mount for 12 Type-F Modules, 38-42 inch x 58-61 inch, 8 inchSCH80, 3hx4W-P, Specify Module # and Manufacturer in order note. DPW part # TPM12-F. The DPW Solar POWER-FAB TPM Top-of-Pole mount is designed to install quickly and provide a secure mounting structure for PV modules on a single pole. The module specific design reduces the number of components and provides for an easier assembly. The TPM utilizes high strength welded steel components and corrosion resistant hardware for long term reliability. Seasonal adjustability for maximizing production is provided by six different tilt-angle settings and is a single person operation.

9000 Watt (9kW) Solar Ground Mount Kit w/SolarEdge Inverter

9000 Watt (9kW) Solar Ground Mount Kit w/SolarEdge Inverter
Special Price
$18,268.00

Is this solar panel kit right for me? For most homes in the United States this 9000 Watt PV optimizer kit is more than enough to completely eliminate their bill. These 9kW size grid-connect solar kits include solar panels, string inverter, and the racking system for roof mount. These are complete PV power systems that can work for a home or business, with everything you need to get the system up and running. The kits include hardware components only; does NOT include labor. A 9kW Solar Kit can require over 600 square feet of space. 9kW or 9 kilowatts is 9,000 watts of DC direct current power. This could produce an estimated 800 to 1,400 kilowatt hours (kWh) of alternating current (AC) power per month, assuming at least 5 sun hours per day with the solar array facing South. The highest output will be achieved with an unobstructed south-facing view of the sun for maximum solar power. The actual power generated will vary based on location, equipment and installation factors. Refer to your electric utility bill to find the actual kWh used per month and compare it to how much power these low cost 8kW PV systems can generate. The average American uses 920kWh per month. Based on that average this system could reduce your bill to ZERO. If you're an average consumer of electricity (920kWh/month), a 9000W system could probably give you the ticket to electric bill freedom. What is included in my 9kW solar installation kit? Our kits provide all the solar components you need from start to finish. GigaWatt 255 Watt Solar Panels SolarEdge Inverter + Power Optimizers Ironridge Racking and Mounting Solar Panels - 36 x 255W high performance 60-cell polycrystalline PV modules with 25 year warranties. Inverter + PV Optimizers - Includes SolarEdge inverter with PV optimizers. Compatible with Tesla Powerwall (Not included). Racking and Attachments - Industry leading IronRidge ground racking mounts the solar panels on the ground. System Monitoring - Free with every kit purchase! View and analyze your solar energy production in real-time. System Design and Financial Analysis - We'll custom engineer this system for your home and calculate the payback on your solar investment. Not Included - Wire, conduit, fittings, breakers, AC/DC Disconnects (if required), junction boxes and a sub panel (if required). All these items can be purchased at any electrical supply shop, Home Depot or Lowes, and will typically cost $300 to $500. Our technical support representative will provide a shopping list once your plans are complete. How easy is it to install? You can install an 8kW ground-mounted solar system in two or three weekends. Our kits use industry leading solar panels, inverter, optimizers, and racking systems specifically selected and combined to make do-it-yourself installation possible. A homeowner who has wired an AC outlet and is comfortable working with electricity can install our Solar kit. If self-installation is not for you, we can help you find a local solar contractor to help you with the process. What is the installation process? A typical solar ground-mounted system for a home can be installed within one or two weekends once a permit is obtained from your city or county. After that, it's just 5 easy steps until you're producing power from the sun. Take your plan set to your city or county and apply for a permit to install. The plan review process can take up to 10 days. Once the city or county approves your plans and issues your permit you may begin installing your solar system. First, the racking and mounting system must be installed. This is the most laborious process of the solar installation process. You have to dig deep holes and pour concrete. Once the racking and mounting system is secured in the ground, the solar panels and inverters can be quickly installed. The inverter(s) are then tied into the grid through a dedicated breaker in your main service panel. When the installation is complete, your city or county inspector must sign off on it. You can accomplish this by scheduling an inspection meeting with them. Lastly, you must send the final job card, interconnection paperwork, and your net metering agreement to your utility. They will then grant you Permission to Operate. It can take up to 4 weeks after passing inspection for your utility to provide you Permission to Operate. With our interconnection service we will process all the paperwork for you. Our job is not over until your system is producing clean energy from the sun! We offer you support throughout the installation process with manuals, videos, and technical support. How much should I pay a contractor to install the solar kit? Any licensed general, electrical or solar contractor can install our solar kits. If you select to hire a contractor to install your solar kit, you should expect to pay approximately $1.00 per watt for labor, wire, conduit, fittings, breakers and other miscellaneous electrical components to complete the solar system installation. For a 8kW (kilowatt) system, which is 8,000 watts, you can expect to pay $8,000 for installation. Benefits of Going Solar Federal government provides a 30% tax credit on all residential solar installations until 12/31/2016. Some state & local governments as well as some utilities are also offering financial incentives to homeowners. Investing in solar on your roof provides 6%-13% return on investment, better than most other investments today. By going solar you'll be supporting local jobs and helping America become more energy independent. By going solar you'll be reducing our dependence on fossil fuels and help clean up the environment for future generations. Buying Solar Leasing Solar Monthly Savings Save up to 100% of your electricity bill Save an average of 20% of your electricity bill Tax credits and incentives Homeowner receives all rebates and credits Homeowner receives no rebates or credits Upfront installation costs Homeowner pays upfront but can leverage mortgage or credit line for positive cash flow Low or no upfront costs Home value Home value increases by $20,000 for each $1,000 offset in annual electricity cost Value of home does not change and new homeowner must negotiate new lease terms System upgrade & customization Homeowner can fully customize and upgrade solar PV system at any time Homeowner locked into leasing company's choice of solar PV system NOTE: Prices are based on average layout with average length wire runs. Your Complete Solar Kit will most likely be a couple hundred dollars below or above depending upon you home's requirements. NOTE: You should also budget for shipping cost and if you're in California, Sales Tax. NOTE: Production values can vary greatly, the numbers here are estimates based on averages. For example a (33) 250W module system: at 32 degrees tilt facing 180 south in San Diego could produce 1,104kWh/month at 23 degree tilt facing 165 southeast in Massachusetts could produce 793kWh/month Call 866-798-4435 to give us details about your house and we can quickly provide a good estimate of how much the kit would produce if installed at the proposed location under proposed tilt and azimuth. You'll need to provide your zip code, your roof tilt and compass heading of the roof pitch.

DPW Solar DPW-SRGM4-G-CS6P-245P-TL > TELESCOPING LEG Roof/Ground Mount for 4 CS6P-245P

DPW Solar DPW-SRGM4-G-CS6P-245P-TL > TELESCOPING LEG Roof/Ground Mount for 4 CS6P-245P
Special Price
$444.86
DPW

DPW Solar's standard roof-ground mount for Canadian Solar panels. This custom product is made to order and usually has a lead time of 3 weeks or more. For a different module/manufacturer or a more precise estimate of lead times, please contact sales at 888-899-3509 ext. 1.

IronRidge Ground Mounting Kit for 12 Solar Panels

IronRidge Ground Mounting Kit for 12 Solar Panels
Special Price
$1,700.00

This is an easy-to-assemble kit for ground mounted PV solar systems holding 12 panels in a four vertical (landscape) by three across setup at 20 degree tilt. The kit includes all the solar mounting hardware needed to install the system (posts, rails, clamps and hardware). This 8 post kit does not include solar panels, cables, inverters or concrete piers. Designed for standard loads up to 110 mph wind in Category C exposure, and 20 psf snow at 20 degree tilt. Fits standard residential and commercial XL modules up to 40 x 79 inches. 20 year limited warranty from IronRidge. PE Certified Dry Stamped design letter available for most states.

7000 Watt (7kW) Solar Ground Mount Kit w/Microinverters

7000 Watt (7kW) Solar Ground Mount Kit w/Microinverters
Special Price
$14,209.00

Is this solar panel kit right for me? For half the homes in the United States this 7000 Watt microinverter based kit is more than enough to completely eliminate their bill. You'll need the roof space though. The modules will occupy about 445ft² of roof space. Luckily with microinverters the modules can be placed anywhere, they don't have to be grouped all together. The average American uses 920kWh per month. Based on that average this system could provide 49-99% of your usage and reduce your bill to almost ZERO. If you're an average consumer of electricity (920kWh/month), a 7kW system could probably give you the ticket to electric bill freedom. A 7kW Solar Kit requires up to 500 square feet of space. 7kW or 7 kilowatts is 7,000 watts of DC direct current power. This could produce an estimated 450 to 1,200 kilowatt hours (kWh) of alternating current (AC) power per month, assuming at least 5 sun hours per day with the solar array facing South. The highest output will be achieved with an unobstructed south-facing view of the sun for maximum solar power. The actual power generated will vary based on location, equipment and installation factors. Refer to your electric utility bill to find the actual kWh used per month and compare it to how much power these low cost 7kW PV systems can generate. What is included in my 7kW solar installation kit? Our kits provide all the solar components you need from start to finish. GigaWatt 255 Watt Solar Panels APS YC500A Grid-Tie Microinverters Ironridge Racking and Mounting Solar Panels - 28 x 255W high performance 60-cell polycrystalline PV modules with 25 year warranties. Micro Inverters - 14 x efficient APS micro-inverters that connect two PV modules per inverter. Racking and Attachments - Industry leading IronRidge ground racking mounts the solar panels on the ground. System Monitoring - Free with every kit purchase! View and analyze your solar energy production in real-time. System Design and Financial Analysis - We'll custom engineer this system for your home and calculate the payback on your solar investment. Not Included - Wire, conduit, fittings, breakers, AC/DC Disconnects (if required), junction boxes and a sub panel (if required). All these items can be purchased at any electrical supply shop, Home Depot or Lowes, and will typically cost $300 to $500. Our technical support representative will provide a shopping list once your plans are complete. How easy is it to install? You can install a 4kW ground-mounted solar system in one or two weekends. Our kits use industry leading solar panels, inverters, and racking systems specifically selected and combined to make do-it-yourself installation possible. A homeowner who has wired an AC outlet and is comfortable working with electricity can install our Solar kit. The micro-inverters in our kits have significantly improved the safety of installing a solar panel system by generating standard AC power instead of dangerous DC power. Micro-inverters allow you to have as few or as many panels as you like and to easily expand your system later. They simplify installation as well as allowing monitoring of each module independently. Since each panel is an individual system they maximize the power output from each panel resulting in an average 15% increase in power generation per panel. If self-installation is not for you, we can help you find a local solar contractor to help you with the process. What is the installation process? A typical solar ground-mounted system for a home can be installed within one or two weekends once a permit is obtained from your city or county. After that, it's just 5 easy steps until you're producing power from the sun. Take your plan set to your city or county and apply for a permit to install. The plan review process can take up to 10 days. Once the city or county approves your plans and issues your permit you may begin installing your solar system. First, the racking and mounting system must be installed. This is the most laborious process of the solar installation process. You have to dig deep holes and pour concrete. Once the racking and mounting system is secured in the ground, the solar panels and inverters can be quickly installed. The inverter(s) are then tied into the grid through a dedicated breaker in your main service panel. When the installation is complete, your city or county inspector must sign off on it. You can accomplish this by scheduling an inspection meeting with them. Lastly, you must send the final job card, interconnection paperwork, and your net metering agreement to your utility. They will then grant you Permission to Operate. It can take up to 4 weeks after passing inspection for your utility to provide you Permission to Operate. With our interconnection service we will process all the paperwork for you. Our job is not over until your system is producing clean energy from the sun! We offer you support throughout the installation process with manuals, videos, and technical support. How much should I pay a contractor to install the solar kit? Any licensed general, electrical or solar contractor can install our solar kits. If you select to hire a contractor to install your solar kit, you should expect to pay approximately $1.00 per watt for labor, wire, conduit, fittings, breakers and other miscellaneous electrical components to complete the solar system installation. For a 4 kW (kilowatt) system, which is 4,000 watts, you can expect to pay $4,000 for installation. Why Choose Grid-Tie Microinverters? Safer: The system does not employ dangerous, unprotected high DC voltages, eliminating the risk of potential fires as outlined above. The system's cabling from your solar system to your switchboard is regular 240V AC, the same as all other household cabling, and is circuit protected via a circuit breaker in your switchboard. Shade tolerant and fault redundancy: Each solar panel operates independently, as it has its own dedicated micro inverter. The result is that the system does not suffer from the 'Christmas light effect' explained above; one shaded or soiled panel will result in a loss of power from that panel only, and will not drag down the performance of the others. The same goes for any fault; in a conventional DC solar system, a complete failure of a solar panel or central string inverter will usually result in an entire system failure. Easily expandable: The system size is not ultimately dictated by the capacity of a wall mounted string inverter, allowing for additional panels to be added at any time and only limited by your space and budget. Your Complete Solar Kit is based on the best micro-inverters in the business. These inverters are backed by world class technical & customer support. They come with an unparalleled 25 year warranty that matches the 25 year performance module warranty. One of the best features of the micro inverter is the ability to size your system in 2 module increments. Call 866-798-4435 to give us details about your house and we can quickly provide a good estimate of how much the kit would produce if installed at the proposed location under proposed tilt and azimuth. You'll need to provide your zip code, your solar panel tilt and compass heading of the solar panel pitch. Free System Monitoring The APS microinverter solution offers intelligent monitoring through the integrated APS Communicator, our state-of-the-art Energy Communication Unit, and the APS Monitor, our full-featured Energy Monitoring & Analysis software. The APS Communicator (ECU) The APS Communicator, our state-of-the-art Energy Communication Unit (ECU), is the information gateway for our microinverters. The unit collects module performance data from each individual microinverter and transfers this information to an internet database in real time, requiring only a single data and power cable. Through the APS Monitor software, the APS Communicator gives you precise analysis of each microinverter and module in your solar installation from any web-connected device. The APS Communicator's integrated http webserver offers the simplest and most flexible network integration of any data logger on the market. The user-friendly browser-based interface lets you access your solar array in seconds. Features Collects individual module and microinverter statistics Communicates in real time Requires no additional wiring The APS Monitor (EMA) The APS Monitor, our robust wireless Energy Monitoring and Analysis (EMA) software, enables comprehensive, web-based monitoring that analyzes and reports the performance of each module in your solar array. This real-time data can be accessed from any web-connected device, anywhere, anytime. Unlike conventional "string" inverter systems, the APS Monitor gives you control over each individual module and microinverter in your solar array, optimizing performance over the system's lifetime. Networked with the advanced APS Communicator (ECU), the APS Monitor (EMA) promptly detects any performance issues in your solar array, pinpointing the location and nature of the problem and providing precise guidance for necessary maintenance, all within our user-friendly graphic interface. Features Monitors and allows analysis of each solar module and microinverter Allows remote access to the solar array Shows performance issues and alerts the user to inverter events Communicates in real time Graphs system solar output over time to boost troubleshooting

DPW Top of Pole Mount for 9 Type G Modules

DPW Top of Pole Mount for 9 Type G Modules
Special Price
$1,890.00

DPW TPM, Top-of-Pole Mount for 9 Type-G Modules, 37-42 inch x 61-67 inch, 8 inchSCH40, 3hx3w-P, Specify Module # and Manufacturer in order note. DPW part # TPM9-G. The DPW Solar POWER-FAB TPM Top-of-Pole mount is designed to install quickly and provide a secure mounting structure for PV modules on a single pole. The module specific design reduces the number of com- ponents and provides for an easier assembly. The TPM utilizes high strength welded steel components and corrosion resistant hardware for long term reliability. Seasonal adjustability for maximizing production is provided by six different tilt-angle settings and is a single person operation.

DPW Top of Pole Mount for 6 Type G Modules

DPW Top of Pole Mount for 6 Type G Modules
Special Price
$1,297.00

DPW TPM, Top-of-Pole Mount for 6 Type-G Modules, 37-42 inch x 61-67 inch, 6 inchSCH40, 3hx2w-L, Specify Module # and Manufacturer in order note. DPW part # TPM6-G. The DPW Solar POWER-FAB TPM Top-of-Pole mount is designed to install quickly and provide a secure mounting structure for PV modules on a single pole. The module specific design reduces the number of components and provides for an easier assembly. The TPM utilizes high strength welded steel components and corrosion resistant hardware for long term reliability. Seasonal adjustability for maximizing production is provided by six different tilt-angle settings and is a single person operation.

 
 
 
 
/* ]]> */