/>

blogger ACT D'MAND Kontrol Systems ACT D'MAND Kontrol Systems youtube pinterest pinterest pinterest


ACT D'MAND Kontrol Systems

 

Act D'MAND Kontrol System BR3-200-PF Bronze Volute - For large home or business with standard plumbing

Other Products
How To Videos for Act D'MAND Kontrol System BR3-200-PF Bronze Volute - For large home or business with standard plumbing

Act D'MAND Kontrols® System 3-Speed Pump Model BR3-200-PF For standard plumbing Bronze pump Large stator motor 1hp 115v PF Kit included Recommended for use with standard plumbing systems in buildings larger than 4,000 sq. ft. with tank water heaters Or pipe runs over 100 lineal ft. between a tankless water heater and installation location of the D'MAND KONTROLS® This product can be used on new homes or existing homes. • Saves water, energy, time, and money • Reduces sewage processing • Reduces carbon footprint • Equipped with 3/4" MIP flanges for easy install • Maintenance free • Operational cost of less than $1 a year • Increases the life of any water heater up to 25% • Life expectancy of 20 years The D'MAND Kontrols® BR3 Series converts standard plumbed homes into D'MAND Kontrols® Systems. At the push of a button, the BR3-Series pumps cold water sitting in the hot water line into the cold water line and back to the water heater. The "temperature sensor" automatically shuts off the pump allowing the pump's IFC (Integral Flow Control) Valve to close when hot water arrives at the fixture. Now you have hot water within seconds at the fixture and anywhere else plumbed off of the main line. The BR3 series models are designed for use with standard plumbing systems in buildings larger than 4,000 sq. ft. with tank water heaters Or pipe runs over 100 lineal ft. between a tankless water heater and installation location of the D'MAND KONTROLS® System. The patented PDV (Check Valve) is built right into the pump housing, reducing the number of external devices. It is suitable for runs up to approximately 100 feet. Product Warranty: 5 Year Manufacturer Warranty BR3-200-PF Includes: • Bronze pump • Electronic circuit board • Thermosensor mounted in lead free bronze volute • 3/4" threaded stainless steel flanges • Internal check valve • Includes one hard-wired activation button (chrome) • Pre Fabrication Kit (PF): Two (2) stainless steel 3/4" ID, 18" corrugated flex lines with threaded male/female ends Two (2) custom machine tooled no lead brass T's

 

Act D'MAND Kontrol System S3-100-PF Stainless Steel Volute - For medium home or business with standard plumbing

Act D'MAND Kontrol System S3-100-PF Stainless Steel Volute - For medium home or business with standard plumbing
Special Price
$880.00
Act D'MAND

Act D'MAND Kontrols® System 3-Speed Pump Model S3-100-PF For standard plumbing systems Stainless steel pump Small stator motor 1hp 115v PF Kit Included Recommended for use with standard plumbing systems in buildings up to 4,000 sq. ft. with tank water heaters. Or pipe runs up to 100 lineal ft. between a tankless water heater and installation location of the D'MAND KONTROLS® System. Is this the right model for you? See sizing This product can be used on new homes or existing homes. • Saves water, energy, time, and money • Reduces sewage processing • Reduces carbon footprint • Equipped with 3/4" MIP flanges for easy install • Maintenance free • Operational cost of less than $1 a year • Increases the life of any water heater up to 25% • Life expectancy of 20 years The D'MAND Kontrols® S3-Series converts standard plumbed homes into D'MAND Kontrols® Systems. At the push of a button, the S3-Series pumps cold water sitting in the hot water line into the cold water line and back to the water heater. The "temperature sensor" automatically shuts off the pump allowing the pump's IFC (Integral Flow Control) Valve to close when hot water arrives at the fixture. Now you have hot water within seconds at the fixture and anywhere else plumbed off of the main line. The S3 series models are recommended for use with standard plumbing systems in buildings up to 4,000 sq. ft. with tank water heaters. Or pipe runs up to 100 lineal ft. between a tankless water heater and installation location of the D'MAND KONTROLS® System. The patented PDV (Check Valve) is built right into the pump housing, reducing the number of external devices. It is suitable for runs up to approximately 120 feet. Product Warranty: 5 Year Manufacturer Warranty S3-100-PF Includes: • Stainless steel pump • Electronic circuit board • Thermosensor mounted in stainless steel volute • 3/4" threaded stainless steel flanges • Internal check valve • Includes one hard-wired activation button (chrome) • Pre Fabrication Kit (PF): Two (2) stainless steel 3/4" ID, 18" corrugated flex lines with threaded male/female ends Two (2) custom machine tooled no lead brass T's

Act D'MAND Kontrol System BR3-200-PF Bronze Volute - For large home or business with standard plumbing

Act D'MAND Kontrol System BR3-200-PF Bronze Volute - For large home or business with standard plumbing
Special Price
$1,305.00

Act D'MAND Kontrols® System 3-Speed Pump Model BR3-200-PF For standard plumbing Bronze pump Large stator motor 1hp 115v PF Kit included Recommended for use with standard plumbing systems in buildings larger than 4,000 sq. ft. with tank water heaters Or pipe runs over 100 lineal ft. between a tankless water heater and installation location of the D'MAND KONTROLS® This product can be used on new homes or existing homes. • Saves water, energy, time, and money • Reduces sewage processing • Reduces carbon footprint • Equipped with 3/4" MIP flanges for easy install • Maintenance free • Operational cost of less than $1 a year • Increases the life of any water heater up to 25% • Life expectancy of 20 years The D'MAND Kontrols® BR3 Series converts standard plumbed homes into D'MAND Kontrols® Systems. At the push of a button, the BR3-Series pumps cold water sitting in the hot water line into the cold water line and back to the water heater. The "temperature sensor" automatically shuts off the pump allowing the pump's IFC (Integral Flow Control) Valve to close when hot water arrives at the fixture. Now you have hot water within seconds at the fixture and anywhere else plumbed off of the main line. The BR3 series models are designed for use with standard plumbing systems in buildings larger than 4,000 sq. ft. with tank water heaters Or pipe runs over 100 lineal ft. between a tankless water heater and installation location of the D'MAND KONTROLS® System. The patented PDV (Check Valve) is built right into the pump housing, reducing the number of external devices. It is suitable for runs up to approximately 100 feet. Product Warranty: 5 Year Manufacturer Warranty BR3-200-PF Includes: • Bronze pump • Electronic circuit board • Thermosensor mounted in lead free bronze volute • 3/4" threaded stainless steel flanges • Internal check valve • Includes one hard-wired activation button (chrome) • Pre Fabrication Kit (PF): Two (2) stainless steel 3/4" ID, 18" corrugated flex lines with threaded male/female ends Two (2) custom machine tooled no lead brass T's

Act D'MAND Kontrol System C3-100 Composite Volute - For small home or business with dedicated return line

Act D'MAND Kontrol System C3-100 Composite Volute - For small home or business with dedicated return line
Special Price
$615.00
Act D'MAND

Act D'MAND Kontrols® System 3-Speed Pump Model C3-100 For Structured Plumbing Systems incorporating a dedicated hot water return line. Composite pump Small stator motor Recommended for use with dedicated return lines in buildings up to 4,000 sq. ft. with tank water heaters. Or pipe runs up to 120 lineal ft. with tankless water heaters. This product can be used on new homes or existing homes. • Saves water, energy, time, and money • Reduces sewage processing • Reduces carbon footprint • Equipped with 3/4" composite MIP male adapters for easy install • Maintenance free • Operational cost of less than $1 a year • Increases the life of any water heater up to 25% • Life expectancy of 20 years The D'MAND Kontrols® C3-Series converts standard plumbed homes into D'MAND Kontrols® Systems. At the push of a button, the C3-Series pumps cold water sitting in the hot water line into the cold water line and back to the water heater. The "temperature sensor" automatically shuts off the pump allowing the pump's IFC (Integral Flow Control) Valve to close when hot water arrives at the fixture. Now you have hot water within seconds at the fixture and anywhere else plumbed off of the main line. The C3 series models are recommended for use with dedicated return lines in buildings up to 4,000 sq. ft. with tank water heaters. Or pipe runs up to 120 lineal ft. with tankless water heaters. The patented PDV (Check Valve) is built right into the pump housing, reducing the number of external devices. It is suitable for runs up to approximately 100 feet. Product Warranty: 5 Year Manufacturer Warranty C3-100 Includes: • Composite pump • Electronic circuit board • Thermosensor mounted in composite volute • 3/4" CPVC threaded connections • Internal check valve • Includes one hard-wired activation button (chrome)

Act D'MAND Kontrol System C3-100-PF Composite Volute - For small home or business with standard plumbing

Act D'MAND Kontrol System C3-100-PF Composite Volute - For small home or business with standard plumbing
Special Price
$740.00
Act D'MAND

Act D'MAND Kontrols® System 3-Speed Pump Model C3-100-PF For standard plumbing systems Composite pump Small stator motor 1hp 115v PF Kit included Recommended for use with standard plumbing systems in buildings up to 4,000 sq. ft. with tank water heaters. Or pipe runs up to 60 lineal ft. Is this the right model for you? See sizing This product can be used on new homes or existing homes. • Saves water, energy, time, and money • Reduces sewage processing • Reduces carbon footprint • Equipped with 3/4" composite MIP male adapters for easy install • Maintenance free • Operational cost of less than $1 a year • Increases the life of any water heater up to 25% • Life expectancy of 20 years The D'MAND Kontrols® C3-Series converts standard plumbed homes into D'MAND Kontrols® Systems. At the push of a button, the C3-Series pumps cold water sitting in the hot water line into the cold water line and back to the water heater. The "temperature sensor" automatically shuts off the pump allowing the pump's IFC (Integral Flow Control) Valve to close when hot water arrives at the fixture. Now you have hot water within seconds at the fixture and anywhere else plumbed off of the main line. The C3 series models are recommended for use with standard plumbing systems in buildings up to 4,000 sq. ft. with tank water heaters. Or pipe runs up to 60 lineal ft. between a tankless water heater and installation location of the D'MAND KONTROLS® System. The patented PDV (Check Valve) is built right into the pump housing, reducing the number of external devices. It is suitable for runs up to approximately 100 feet. Product Warranty: 5 Year Manufacturer Warranty C3-100-PF Includes: • Composite pump • Electronic circuit board • Thermosensor mounted in composite volute • 3/4" CPVC threaded connections • Internal check valve • Includes one hard-wired activation button (chrome) • Pre Fabrication Kit (PF): Two (2) stainless steel 3/4" ID, 18" corrugated flex lines with threaded male/female ends Two (2) custom machine tooled no lead brass T's

 
 
 
 
/* ]]> */